Security Upgrade for OEM Factory Installed Alarm Systems
Deter vandalism or prevent any further attempt of interior theft and damage done to your vehicle by adding a 2nd layer of alarm notification to your vehicle's factory alarm system.
The majority of OEM factory-installed alarm systems only monitor the vehicle's doors and trigger only when one of the vehicle's doors are opened without using one of the vehicle's remote keyless entry key-fobs or unlocking the door manually with a key. And, unfortunately, thieves commonly only slim-jim the door open when they are there to steal the vehicle itself, otherwise, it's "smash-and-grab".
Advanced Electromagnetic Micro-Sized Design:
Sensor detects vibration to the vehicle utilizing electromagnectic disturbance technology. Sensor only measures 23/4" by 11/2" by 1". Notched for secure mounting using supplied zip-tie or supplied 3M 2-way tape for mounting flush against a flat surface.
Vehicle Specific Sensor:
Available for over 500 specific vehicles equipped with Factory Alarm Systems; You will be asked to indicate the Year, Make, and Model of Vehicle the Sensor will be Installed into during checkout.
Simplified Installation:
Requiring only 3 T-Tap connections (supplied) to the vehicle's wiring and one to Chassis Ground. All connections are made in the driver's side underdash area. Interior installation only. All connectors required are included.
Automatic Arming & Disarming:
Nothing additional to do, turns ON automatically when your vehicle's factory alarm turns ON, and then OFF when the factory alarm is turned OFF.
Adjustable Sensitivity:
Using a small Phillips screwdriver, turning the sensitivity potentiometer clockwise turns the sensitivity UP, and counterclockwise turns it down, works exactly like a volumn knob.
Flashing RED Security LED:
A great theft deterrent that flashes RED every second the sensor is ON.
Sensor Bypass ON/OFF Switch:
Easily turn the sensor off when needed simply by flipping a switch. The LED will light Solid RED when OFF.
Pre-Mounted Sensor Bypass Switch & LED Housing:
No drilling for LED or Switch required. The ON/OFF toggle switch and LED are mounted together in a housing that can be mounted horizontally under the driver's dash or vertically on the dash using the supplied 2-way tape or self-tapping screws.
2-Year Limited Warranty
EASY SENSITIVITY ADJUSTMENT
BASIC WIRING DIAGRAM
2-YEAR WARRANTY
Sales, Support, and Product Information:
MotorCityRemotes™ Call Toll-Free: 1-866-244-8004
Tech-Direct Help Line: 1-586-315-4005 OPEN 7 DAYS: Mon-Fri: 9am-7pm, Sat: 9am-5pm & Sun: 9am-3pm ET
CLOSED: Major Holidays & Holiday Weekends
Sales, Support, Website Office located in Downtown New Baltimore, MI.
